First, equipment use and introduction: CNC cutting saw is a high efficiency fine cutting saw. This CNC cutting saw can complete the vertical and horizontal bidirectional cutting, can completely replace only one-way cutting electronic cutting saw and high cost of manual push table saw. The efficiency is more than 6 times that of manual push table saw.
Second. Site working conditions and environment:
1. Processing product material: wood.
2. Applicable power supply: three-phase 380V±10%, 50Hz±2%.
3. Relative humidity 61%-81%.
4. Temperature: -5ºC~40ºC.
Third. Technical parameters and configuration:
1. Model number: YH-J
2. Course: X axis...... >4500mm
Y axis...... >2000mm
Z axis...... >150mm
3. Worktable: 4500*2000mm Material: density board
4. The fastest moving speed: X axis, Y axis: ≤36m/min; Z: ≤20m/min
5. The fastest cutting speed: X axis, Y axis: ≤20m/min; Z: ≤15m/min
6. Total installed power: about 20kw
7. System: Taiwan Baoyuan
8. Rail: Taiwan CSK, Germany SLM, Taiwan Shanghai Silver
9. Saw shaft motor moss new 9kw 7.5kw
10. Screw oil feeding mode: automatic (advanced grease) guide rail oil feeding mode: automatic (advanced grease..
11. Working pressure :0.7MPA
12. Voltage requirements: three-phase 380 V, 50-60 Hz. Mechanical accuracy according to GB/39351-96 standard. The frame beam and base are standard.
13. Signal power cord: less than 4 square meters for the drag chain special high flexible wire
14. Machine accuracy: geometric accuracy 0.1mm/200mm; Repeated positioning accuracy: ≤ 0.1mm; Workpiece machining accuracy: ±0.1mm/200mm
15. Both beam mounting frame and table mounting frame adopt thickened square pass
400 times 300 times 10, 300 times 150 times 8
16.16mm20mm thick steel plate welding, and do stress relief treatment
17. Use coarse. Fine. Secondary processing ensures its mechanical accuracy
18. The connection between servo motor and screw is connected by expansion diaphragm coupling, which is safer and more reliable. The Z-axis adopts high-power servo motor with brake to ensure Z after power failure and gas break
The shaft will not fall, so as to avoid damage to the workpiece and table
19. With hand pulse handwheel
20. Maximum size of saw blade: 14 inch 355mm
21. Electrical Appliances: Schneider, France
22. Body color: White
Fourth, electrical parts:
The system adopts the latest industrial system LCD display in Taiwan.
The system opens automatic function touch screen can be operated directly.
External PC and portable computer can be connected through software.
Can directly input programs and modify. Network online transmission processing function. (With USB port.)
There is fault self-diagnosis, display function. Chinese panel is easy to operate.
The processing feed speed can be changed at any time as required by on-site production. Work coordinate display call function.
Automatic tool compensation function.
Servo controller adopts Inweiteng Zhishan servo controller. This machine is compatible with Fanuc Siemens systems.
Fifth, performance characteristics :(accessory configuration)
The table adopts the checkerboard design table. Can withstand high load machining. Taiwan TBI high precision ball screw and female pair (P1 class), and Taiwan CSK high precision dust proof guide rail, and can withstand high load ball bearings.
The X-axis guide rail adopts the 30HSS series, and the two guides are equipped with four sliders, which can withstand high load for a long time.
The Y-axis guide rail adopts the 30CSS series, and the two guides are equipped with four sliders, which can withstand long time and high load.
Z-axis guide rail adopts 30HSS series, four guide rails
Multiple overtravel protection
Adopt humanized standard safety display light. Automatic oil supply system
Sixth, standard configuration and accessories
Z-axis cylinder specification :SC80*250S
Cylinder size :MGPM63*75-S
Roller cylinder specification :SC50*125-S
Standard toolbox (simple tools) 1 set
All kinds of operating instructions, 1 set of documents
){kind=link}