Product Description
New Generation Aluminum Concentrative Melting Furnace
Features
Furnace Structure
The design of furnace is new L type or straight type that is suitable for any foundries of their space. It is still with the melting room, holding room and dipping poor that make it with best efficiency and convenience.
Furance Refractory
It casts the special low cement castable to avoid the dross attacked and easy to clean for longer service life.
Burning and Control System
Special burner type can control the temperature steadily, easy to maintain and safer.
Specification
MODEL : HXAL-0.75T
Holding Al (kgs) : 2500 kg
Max. Supply Al /Hr : 750 kg/h
W x L x H1 X H2 The equipment is a non-standard customized product, and an external dimension drawing will be provided after signing the contract.
A-1, Overview of the furnace
1. Model HXAL-0.75T rapid centralized melting furnace
2. Quantity: 1 unit
3. Set up the factory for users of the venue
4. Furnace capacity 2500 Kg (actual effective capacity during continuous melting, specific gravity 2.4)
5. Melting capacity 750Kg/H (continuous operation) (note: under rated power conditions)
6. Aluminum liquid temperature 700~750 ºC
7. Temperature control accuracy ± 10 ºC
8. The actual calorific value of natural gas used as fuel is 8400Kcal/Nm3
Gas supply pressure 5KPa (500mmH20)
9. Energy consumption target: natural gas 65-75Nm3/ton aluminum (note: under rated operating conditions)
10. The rated power condition must be based on meeting the following conditions:
1) The debris and other materials in the recycled waste, especially those that are not easily oxidized.
2) The furnace tower always maintains a certain amount of material, with the condition of 750Kg/H melted material and 750Kg/H continuously discharged aluminum liquid.
3) Melting material ratio, 50% for recycled materials and 50% for aluminum ingots
4) Melt temperature, based on 710 ºC.
5) The furnace should be in a stable state of continuous operation day and night
6) Calculate the average combustion consumption rate over 3 hours during continuous melting.
7) The melting furnace and associated equipment are operating normally.
11. Melting material
1) Aluminum ingot (1 piece with an average weight of 5Kg) melting and filling rate of 50% (must be dispersed and input)
2) The maximum size of recycled materials is below W350 × L300 × H100
Melting filling rate 50%
A-2, Furnace structure
1. Metal components
The outer shell of 10.0mm and the bottom plate are made of 12.0mm steel plates and reinforced with 12 # I-beams and 12 # channel steels, and are welded internally and externally. Except for some structures, they are basically constructed by metal welding.
2. Take soup mouth
Cylinder driven structure, automatically controls the cylinder to open or close the soup intake cover through signal transmission, in order to cooperate with the automatic soup dispenser's soup intake work.
3. Low level liquid outlet
The outlet part is made of shaped refractory material and can be opened or closed by manually operating the plug. The outlet is used to discharge residual aluminum liquid during shutdown. (Iron plug head and filling cap are consumables).
4. Slag collection door and its inspection and cleaning door
The metal components around each furnace door and the refractory material on the inside of the door are made of high-strength, high-temperature resistant concrete.
Slag gate size W600 × H500 manual hinged type
Inspection and cleaning door size W500 × H300 manual hinged type
5. Feeding port cover
The shell frame of the feeding port cover is welded with carbon steel, and the interior is poured with heat-resistant concrete. The opening and closing of the top cover is driven by a cylinder. There are interlocking devices between the feeding machine and the furnace cover, and interlocking devices are also installed between the melting burner, feeding machine, and furnace cover.
Detailed Photos
Company Profile
Liaoning Jinrong Machinery Import and Export Co., LTD
Liaoning Jinrong Machinery Import and Export Co., Ltd. is a company with its own import and export rights, and is a large group company integrating industry and trade. The registered capital of the company is RMB 180 million. The company includes metallurgical equipment manufacturing company, electric furnace equipment manufacturing company, electrical equipment manufacturing branch, mechanical processing branch and metallurgical design and research Institute.
Our company can undertake all kinds of metallurgical equipment design, manufacturing, installation, commissioning, trial production turnkey project. Our company can provide mining machinery and equipment, ironmaking blast furnace, sintering machine, coke oven, converter, electric arc furnace, ladle refining furnace, continuous casting equipment, steel rolling furnace, steel rolling production line, steel structure plant and crane and other metallurgical equipment and metallurgical machinery. Various other types of mechanical equipment are also available.
Our company is the direct agent of Anshan Steel, Bensteel, Fusteel and other large steel mills, the variety of steel is complete: pipe, plate, profile, wire and so on are in stock. If the special specifications, materials and other requirements, we can organize the order to purchase, schedule production and rolling, to ensure supply.
Our company has a history of 30 years, and now has established friendly contacts with more than 120 countries and regions and carried out various aspects of cooperation. We welcome customers from all over the world to visit our company.
Our company address is: 9th floor, Jiangsu Building, Qianyuan Emerging Market, Tiexi District, Anshan City, Liaoning Province1-51-901-3041
Location :1-51-901-3041, Floor 9, Jiangsu Building, Qianyuan Emerging Market, Tiexi District, Anshan City, Liaoning Province.
){kind=link}