Product Description
2800/250 Triple Fourdrinier Wire With Multi Cylinder Kraft Liner Paper Machine
PRESENTATION OF THE PROJECT
SELLER Paper Machinery to offer a proposal for a brand new machine from head box to rewinder for 2800-250 triple-wires four drinier multi cylinder test liner paper machine.
SELLER is responsible for the general layout design and supply of the paper
machine from headbox to pope reel and rewinder.
SCOPE:
3 PLY wire section (Top ply 6000mm, Under top ply 9000mm, Bottom ply 20000mm)
Ø 850 mm/ Ø 900 mm suction press
Ø 1250 mm/ Ø 1250 mm jumbo press
Ø 1250 mm/ Ø 1250 mm jumbo press
Dry section (24 x Ø 1800)
8+8+ size pres (Ø 750 mm/ Ø 750 mm) + 8
Sizing machine Φ950/950mm
Calender Φ500/500mm
Pope reeling machine
Rewinder
Product Parameters
Technical specifications
Main technical parameters
In accordance with your requirements, we had designed the equipment to obtain the following characteristics:
Introduction of paper and pulp
| Item |
Test-liner paper & kraft paper |
| Ration |
120-300g/m² |
| General ration |
150g/m² |
Specification data of paper machine
| Capacity |
100T/24hours(according to 150g/m2, 165m/min,22.5 hours) |
| Wire width |
3200mm |
| Paper width before reeling machine |
2860mm |
| Trimmed width |
2800mm |
| Gauge |
3800mm |
Speed
| Design speed |
250mm |
| Balanced speed |
350m/min |
| Transmission speed |
230m/min |
| Dynamic Balanced Vehicle Speed of reeling roller |
1200m/min |
| Working speed |
130-180m/min |
Dry degree
| Concentration of wire |
0.5-1.0% |
| Out of wire section |
20%~22% (±1%) |
| Out of press section |
44-46% (±1%) |
| Before sizing |
92% |
| Before reeling |
92% |
| Sizing concentration |
8% |
| The transverse shrinkage |
About 3.5-4% |
| Arrange layout |
Stand at the reel machine and look at the wire. Drive section on the right hand side. |
Arrange layout
| Paper machine layout |
Single floor |
| Align type |
Right hand machine |
| Cross moisture difference |
≤±1% |
| Cross quantitative difference |
≤±1.5%6 |
Crane
The maximum weight is press roller Maximum load weight 15 T
Roller Dynamic Balance Grade G2.5
Dryer cylinder Dynamic Balance Grade G4
Requirements for water,electricity, steam, hydraulic and compressed air
Clear water and clarified water
Clear water: Pure, colorless and sand removal are required.
| Ph |
Value approaching neutrality. |
| Press |
3MPa,2MPa,0.4MPa. |
Clarified water (recovery of white water).
| Maximum solid content |
100mg/l; |
| Ph |
6-8; |
| Press |
0.4MPa. |
Power source parameters
| High voltage |
AC10000V±10% |
| Low voltage |
AC400V/220V±5% |
| Frequency |
50HZ±1% |
| Mill power supply |
400 V AC ± 10% - 50 Hz ± 5% - 3 Ph |
| Electrical Power |
3x400 VAC 50 Hz, 1x220 VAC 50 Hz |
| Control Power |
220 VAC, 50 Hz, 1 Phase |
| Input PLC Signal |
24 VDC |
| Output PLC Signal |
24 VDC |
Atmoshere local conditions
| Annual average temperature |
11.1 °C |
| Highest temperature |
40 °C |
| Lowest temperature |
-35 °C |
| Lowerst indoor temperature |
-20 °C |
Air
| Compressed air (working air) |
Max pressure 0.7 MPa |
| Compressed air (instrument air) |
Design pressure 0.4 MPa, well dried |
| Temperature ambient air electric |
15-40° C |
| Switch cabinet and control cabinet |
15-40° C |
| Air moisture for ambient air electric |
30-90 % |
| Switch cabinet and control cabinet |
30-90 % |
Steam: Maximum steam pressure of dryer is 0.5MPa (working pressure)
Compressed air
| Medium pressure (gas source) |
0.6~0.7Mpa |
| Use pressure |
≤0.5Mpa |
| Quality requirement |
1.Instrument air: filtration, no oil, no water
2.Plant air: General compressed air (dry)
|
| Steam temperature |
≤35ºC |
Other
| Color of machine |
To be decided |
Packaging & Shipping
40 foot container or customized
Our Advantages
We provide professional customized services to meet customers' different capacity needs.
After Sales Service
One year warranty
Company Profile
Introduction to Liaoning JinRong Machinery Import and Export Co., Ltd
Liaoning JinRong Machinery Import and Export Co., Ltd is a company with its own import and export rights, and is a large group company integrating industry and trade. The registered capital of the company is RMB 180 million. The company includes metallurgical equipment manufacturing company, electric furnace equipment manufacturing company, electrical equipment manufacturing branch, mechanical processing branch and metallurgical design and research Institute.
Our company can undertake various of metallurgical equipment design, manufacturing, installation, commissioning, trial production turnkey project. Our company can provide mining machinery and equipment, ironmaking blast furnace, sintering machine, coke oven, converter, electric arc furnace, ladle refining furnace, continuous casting equipment, steel rolling furnace, steel rolling production line, steel structure plant and crane and other metallurgical equipment and metallurgical machinery. Various other types of mechanical equipment can also be provided.
Our company is the direct agent of Anshan Steel, Bensteel, Fusteel and other large steel mills, the variety of steel is complete: pipe, plate, profile, wire and so on are in stock. If there are special specifications, material requirements, etc., we can organize and arrange ordering and selection, schedule production and rolling to ensure supply.
Our company has a history of 30 years, and now has established friendly contacts with more than 120 countries and regions and carried out various aspects of cooperation. We welcome customers from all over the world to visit our company.
Our company address is 1-51-901-3041, 9th Floor, Jiangsu Building, Qianyuan Emerging Market, Tiexi District, Anshan City, Liaoning Province.
| Total Number of Staffs |
585 |
| Total Number of Managers |
40 |
| Total Number of Technical Staffs |
160 |
| Total Number of QC Staffs |
15 |
| Total Number of workers |
310 |
| Total Number of other staffs |
60 |
| Contact person |
Mr .Su |
Position |
President |
Detailed Photos
){kind=link}