LGP Horizontal Compressor From Michael

• Customization: Available
• After-sales Service: 1 Years
• Warranty: 1 Years
• Model NO.: DW-3.0/16-24
• Nw: 362
• Gw: 395
• Term: Fob
• Brand: Jinrong
• Transport Package: Case
• Specification: customied
• Trademark: Jinrong
• Origin: China
• Package Size: 43.00cm * 41.00cm * 34.00cm
• Package Gross Weight: 243.000kg

Product Description

Thank you so much for your attention to our equipment. The parameters, configuration and price of the equipment are as follows:


I. Equipment technical requirements and configuration
Compressor selection and main technical parameters

No	Item				Unit	Value		Remark
	Installation location					Indoor or outdoor covered
	Compressor number					-
	Compressor type					Horizontal, symmetrical and balanced type
	Compressor model					DW-3.0/16-24 type
	Compressor structure					One-stage compression, reciprocating piston type
	Medium					LPG		liquefied petroleum gas
	Processing capacity				m^3/min	3.0		0-400Nm³/h
	Gas volume adjustment		Adjustment method			Frequency conversion + load shedding/bypass		100 - 990rpm
			Control method			Pneumatic/Automatic
	Compressor shaft power				KW	<55.6
	Compressor mechanical efficiency				%	87%
	Compressor speed				rpm	100-990
	Number of cylinders					Primary cylinder × 2		Double acting
	Average piston speed				m/s	<2.4
	Piston force per row			Cover side	t	1.8
				Axle side	t	1.8
	Type of valves					Net valve
	Number of valves				Grade1	Intake valve × 4 Exhaust valve × 4
	Compressor noise					<85
	Vibration				mm	<18mm/s
	Transmission mode					Coupling direct drive
	Main motor parameters
	Model					YBX4-315S-6		High efficiency and energy-saving explosion-proof motor
	Rated power				KW	75
	Rated speed				Rpm	990
	Rated voltage/rated frequency				V/HZ	380/50
	Current				A	143.4
	Efficiency				%	96.4
	Power factor				COSØ	0.85
	Lock torque				(times)	2.0
	Lock current				(times)	6.6
	Maximum torque					2.0
	Explosion-proof grade					dIIBT4
	Lubricating grease					3# General lithium-based grease
	Lubrication interval				h	3000
	Lubrication method	Bearings, crankshafts, connecting rods, crossheads				Oil pump forced lubrication
		Cylinders, packing				Oil-free lubrication
	Lubricating oil type					>5ºC L-DAB 150 <5ºC L-DAB 100
	Filling amount at one time				L	20
	Compressor cooling method					Water cooling
	Medium cooling method					Water cooling
	Cooling water inlet temperature				ºC	<32
	Cooling water inlet flow rate				m^3/h	5
	Medium inlet pressure (gauge pressure)				MPa(G)	1.6
	Medium outlet pressure (gauge pressure)				MPa(G)	2.4
	Safety valve set pressure (gauge pressure)				MPa(G)	2.64
	Medium inlet temperature				ºC	<40
	Medium outlet temperature				ºC	<50		Ambient temperature +15ºC
	Instruments and control panels					With		Installation location: Inside the skid
	Pressure instrument					Intake	On-site, remote
						Exhaust	On-site, remote
						Lubricating oil	On-site, remote
	Temperature instrument					Intake	On-site
						Exhaust	On-site, remote
						Lubricating oil	On-site, remote
	Control module					PLC control
	Signal remote type					Modbus protocol, 485 interface
	Unit weight
	Compressor body				kg	1960
	Frame (frame)				kg	680
	Coupling				kg	54
	Gearbox				kg	-
	Motor				kg	1190
	Total weight				kg	3884
	Maximum lifting weight during installation /Maximum lifting height				kg/m	4000/2m
	Max. lifting weight during maintenance /Max. lifting height				kg/m	2000/2m
	Compressor foundation dimensions (length, width, height)				mm	2500*3500*1600

II.Price and description

Name	Model	Qty	Rate   (USD)	Amount(USD)	Remark
LGP horizontal compressor	DW-3.0/16-24	2 sets	59,028	118,056	Implement Chinese standards
Total amount: USD118,056(FOB Shanghai port) (The quotation does not include freight and other costs, which will be calculated after the equipment is confirmed; the quotation does not include the cost of major spare parts and wearing parts. It does not include on-site commissioning fees) Delivery time: 3~4 months, the quotation is valid for 7 days