Product Description
main purposes and characteristics of the
Main use
Z94-3C automatic nail-making machine is mainly used in the manufacture diameter of 1.8-3.4 mm, length 30-80 mm round nail, if the plane of the wire agencies, institutions, etc. punch machine a little modification, can also create Roofing nails , corrugated nails and other special nails.
Features
1. Machine modeling appearance, reasonable structure, stable, safe, reliable, durable,
Easy maintenance, high production efficiency.
2. All the shaft, cam, gears and other major components of the materials are high-quality steel.
3. With friction between the crankshaft and the flywheel device, machine failure or overload can play
Security protection.
4. Nail-making process fully automated, once started, can be a continuous system of a nail.
Main specifications and parameters:
1. Ф3.4 mm diameter nail
2. Nail Ф1.8 mm minimum diameter
3. Nail the maximum length of 80 mm
4. Nail the minimum length of 30 mm
5 theory of product cost 280 / min
6. Motor power 3 kW
7. Motor Model Y100L2-4
8. Overall dimension length X width X high 2060X1220X1230 mm
9. The weight of 1200 kilograms
drive system (Figure 1)
. Stamping Sports:
A belt driven by a motor rotating the crankshaft pulley 2, due to the rotation of the crankshaft 3, affecting the slider 4 from the work carried out punching.
. Shear Movement:
Left and right axis, respectively 5,6 bevel gear bevel gear on the crankshaft relative to mesh 7,8, crankshaft rotation to the left and right while rotating shaft 9,10, 11,12 cam shaft were installed in the left and right side on the role as eccentric cam, so that pair of scissors cutting movement between the slider to 13-14.
. sending Line Movement:
Crankshaft left eccentric disc 15 and from the drive rod 16 for movement, at the same time affecting the transmission arm 17 swings to get to and from the line of work.
. WIRE Movement:
Cam 18 in rotation, due to the role of cam surface to drive rod 19 to and from the swing, to clip the role of line compaction.
major institutions and adjustments:
1. Wire agencies (Figure 2)
Wire agencies, Block 200 with the body wire fastening screws into the front line in the body frame 300,on the top with wire wheel 202,203,204, totaling 10 for the calibration wire nails.
Rotating screw 201, an adjustable wire wheel 202, thereby adjusting the bending between the upper and lower wire nails. Rotary screw 205 adjustable wire wheel 204, which align the wire around nails between the bent nail wire into the wire from the set of 206 institutions.
2. Into the line agencies (Figure 3)
Jin-line agencies into the wire frame body 300 with screws 303 fastening body 100 before the end of the rod 304 upward mobility in line with the crankshaft eccentric plate 302 connected to the other side with the drive arm 305 connected to the other side with the clip arm transmission line connected to slide 301 , when the crankshaft rotates, into the line of eccentric plate 302 followed them, and leading the rod 304 from movement, thus facilitating transmission to and from the swing arm 305, and drive-line slide clip 301 in the chute before and after the period for sliding into the line so as to achieve the purpose of .
Rotate into the line of the angle of eccentric plate 302, you can change into a different line of the time.
Transferred into the line of eccentricity on the tight tighten the rod, you can get into the lines of different lengths.
Tighten the rod length of 304 can get clip-line slide movement in a different location in the slot. So as to achieve delivery lines in the nails did not have any knife marks purposes.
3. Die clamping mechanism (Figure 4)
Die clamping mechanism of the main nail mold base 400, mounted on the support fuselage surface of the mold station, located in the middle of the front fuselage, transmission rod 401 on the wheel 402 and the left side of the cam shaft 403 in contact, through the compression spring The role of 404, so that between the wheel 402 and cam 403 to maintain a certain pressure, the left axis of rotation to bring the rotary cam. As the role of the cam surface, so that drive rod 401 swings around the pin to travel through the tension spring shaft 405, so that the right nail nails die in the die 406 for round-trip in the movement, so as to achieve the purpose of clamping and release the wire.
Tighten screw clamping wire can be adjusted 407 degrees.
Tighten screw hole 408 can adjust the die left and right locations.
Tighten screw holes 409 can be adjusted on the die, the next location.
4. Stamping bodies (Figure 5)
Stamping body of the main central slider 504, is located in the middle of the fuselage rail slot. One end of connecting rod 501 and crank 502 connected to the other side of the central slider 504 connected to the rotation of the crankshaft connecting rod 501 so that affects the central slide guide slot for round-trip in the central movement, so as to achieve the purpose of stamping.
Release the platen 505, spin nut 506 can be adjusted 507 punch out the length of the slider, which can adjust the thickness of a nail, when the machines stop (that is parked in a 180-degree crankshaft dead position) rather forcefully pry the fixed When the flywheel, that is can be a strong lemon pine nut 506, the machine can export the dead.
5. Cut bodies (Figure 6)
Cut body position and the left and right sides of the axis of the inside of the left and right confrontation between the two groups. Small rod 604 at one end and side cam shaft connected to the other side of the slider 603 connected with the scissors. Left and right cam axis of rotation (due to the role of eccentric cam) affect the scissors slide, so that nail knives for the left and right reciprocating motion, so as to achieve the purpose of cutting nails.
Rotary screw 605 Block 608 can be adjusted before and after the location of scissors, which can be adjusted before and after the location of nail knife.
Company Profile
Liaoning Jinrong Machinery Import and Export Co., Ltd. is a company with its own import and export rights, and is a large group company integrating industry and trade. The registered capital of the company is RMB 180 million. The company includes metallurgical equipment manufacturing company, electric furnace equipment manufacturing company, electrical equipment manufacturing branch, mechanical processing branch and metallurgical design and research Institute.
Our company can undertake all kinds of metallurgical equipment design, manufacturing, installation, commissioning, trial production turnkey project. Our company can provide mining machinery and equipment, ironmaking blast furnace, sintering machine, coke oven, converter, electric arc furnace, ladle refining furnace, continuous casting equipment, steel rolling furnace, steel rolling production line, steel structure plant and crane and other metallurgical equipment and metallurgical machinery. Various other types of mechanical equipment are also available.
Our company is the direct agent of Anshan Steel, Bensteel, Fusteel and other large steel mills, the variety of steel is complete: pipe, plate, profile, wire and so on are in stock. If the special specifications, materials and other requirements, we can organize the order to purchase, schedule production and rolling, to ensure supply.
Our company has a history of 30 years, and now has established friendly contacts with more than 120 countries and regions and carried out various aspects of cooperation. We welcome customers from all over the world to visit our company.
Location :1-51-901-3041, Floor 9, Jiangsu Building, Qianyuan Emerging Market, Tiexi District, Anshan City, Liaoning Province
| Total Number of Staffs |
585 |
| Total Number of Managers |
40 |
| Total Number of Technical Staffs |
160 |
| Total Number of QC Staffs |
15 |
| Total Number of workers |
310 |
| Total Number of other staffs |
60 |
| Contact person |
Mr .Su |
Position |
president |
|
| |
|
|
|
|
| Fax |
|
|
|
|
){kind=link}