Product Description
1, Overview of Machine Tool
The operating system of the machine tool:
1. Using button station operation, combined with touch screen to achieve individual adjustment of machine displacement changes for each action. The cutting speed or return speed of the machine tool is controlled by a servo motor, which can be switched and set according to the specified workpiece on the touch screen.
2. By using touch screen control, the changes in working tension and various states during the cutting process can be observed through the human-machine interface. For various faults, the location of the fault can be automatically displayed and an alarm can be given.
1.1 All parts of the machine tool are well sealed and there is no oil leakage. The workbench is fixed on the column and base, and a positioning reference is installed on the workbench. The base serves as the supporting component of the machine tool and is filled with coolant inside.
1. 1.2 The main slide guide and auxiliary slide guide are separated and use linear guides.
1.1.3 The auxiliary slide board achieves the feeding and lifting actions of the card cutter body through servo motors.
The main and auxiliary blade bodies are both made of steel, and the jaws are made of alloy steel. The main clamping blade body adopts mechanical clamping. The auxiliary clamping blade body adopts a cylinder clamping type, which drives a set of mechanisms to clamp and pull the handle of the knife through the cylinder, and moves together with the auxiliary sliding plate. The specifications are determined according to the handle.
This machine tool does not require digging a pit and is directly installed on the ground, with an operating height of 1000-1100mm. The main slide is driven by a servo motor and used for cutting various geometric shapes of through holes or flower joints.
1.2 Principle:
This machine tool adopts servo motor transmission, which works smoothly and has stepless speed regulation; The cutting method of the machine tool is to fix the workpiece on the worktable, and the main sliding plate is driven by a servo motor to move the ball screw up and down to achieve cutting. The machine tool has a full process escort tool device: there are three operation modes: automatic cycle, semi-automatic cycle, and adjustment, to adapt to the needs of different cutting forms.
The entire cycle of the machine tool is as follows: feeding the vibrating disc to the machining position, feeding the tool, clamping the tool with the chuck and moving downwards, releasing the upper chuck to complete the cutting, automatically pushing out the workpiece, moving the main sliding plate upwards (while the upper chuck moves downwards), releasing the lower chuck, lifting the tool with the upper chuck, and completing one cycle.
1.3 Electrical System
1.3. 1. The usage conditions for the demand side machine tool are: 220V (or 380V) ± 10%, 50Hz.
1.3. The entire electrical system complies with the national standard GB/T5226.1-2008.
1. 3. 3. The electrical cabinet has good sealing, with lighting fixtures and fans inside, and ensures that the temperature rise of the electrical box is below 40 ° C. The electrical box door is equipped with power-off protection when opened.
1. 3. The touch screen and controller are made of Mitsubishi brand, and the low-voltage electrical control components are made of Schneider brand.
1. 3. 5. The machine tool is equipped with three color lights. The green light is on during normal operation, the yellow light is on during normal shutdown, and the red light is on during abnormal shutdown, with an audible alarm.
1.4 The equipment color standard adopts the color specified by the customer. Please provide a standard color palette from the customer
Detailed Photos
){kind=link}