| Customization: | Available |
|---|---|
| After-sales Service: | Negotiated |
| Warranty: | Negotiated |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Technical parameters
| NO. | Explanation of terminology names | technical parameter |
| 1 | Maximum forming area |
600mm×700mm |
| 2 | Minimum forming area |
350mm×410mm |
| 3 | Widest sheet |
650mm |
| 4 | Narrowest sheet |
350mm |
| 5 | Material thickness |
0.20-2.00mm |
| 6 | Maximum sheet material roll diameter |
800mm |
| 7 | Mold opening and closing stroke |
2×140mm |
| 8 | Cutting die opening and closing stroke |
2×140mm |
| 9 | Cutting die lifting stroke |
200mm Up to 200mm |
| 10 | Maximum cutting force |
80T |
| 11 | Work efficiency |
1-42 times/min (depending on the thickness of the material) |
| 12 | cooling method |
The mold is cooled by circulating water |
| 13 | () Client gas source (outside) |
≥4m2/min 0.8Mpa Air supply ≥4m2/min, air pressure 0.8Mpa |
| 14 | Power supply |
380V/50HZ() 380V/50HZ (three-phase and five-wire) |
| 15 | Total power of equipment |
128KW(:40-60KW) 128KW (normal use power: 40-60KW) |
| 16 | Pull tab accuracy |
±0.5MM |
| 17 | () Total weight of equipment (reference) |
14.5T(,) 14.5T (Excluding molds, molds are provided by customers) |
| 18 | Dimensions(reference) |
12000×2100×2800mm |
| Part Name | Brand and description | |
| 1 | Programmable Controller (PLC) | Using Delta PLC programmable control and human-machine interface Taiwan Delta 15-inch color touch screen operating system, this system can greatly enhance the stability and response speed of each action process |
| 2 | Touch display | Delta 15 inch |
| 3 | Forming mold table drive servo | Delta (drive system: five pivots + crank arm + servo motor + worm gear reducer) 5.5KW + servo drive |
| Punching die table drive servo | Delta (drive system: five fulcrum + curved arm + servo motor + turbine reducer) on 7.5KW + under 5.5KW + servo drive | |
| 4 | Turbo reducer | Shanghai Huxing |
| 5 | Servo pull system | Delta 4.5KW+ Servo Drive |
| 6 | Stacking servo system | Delta 2.0KW+ Servo Drive |
| 7 | Power cylinder | Zhicheng |
| 8 | The electromagnetic valve | CKD/ Japan CKD/Taiwan Goldware |
| 9 | Vacuum pump | 160m³/HR (160) Raffles 160m³/HR (the vacuum flow rate is 160 cm³ per hour) |
| 10 | Chiller | 15HP 15HP industrial chiller |
| 11 | Water and oil separator | Japan CKD |
| 12 | Control relay | Omron |
| 13 | AC contactor | Schneider |
| 14 | Heating system | 650W,, 650W far-infrared ceramic radiator, upper and lower electric furnace, three-stage heating |
| 15 | Temperature Control System | The temperature module has constant temperature control and memory function, one-key full control of heating, one key full control of cooling |
| 16 | Stacking system | Automatic counting, automatic stacking |
| 17 | Feeding system | Double-bar automatic mechanical feeding device to reduce the labor intensity of workers |
| 18 | Body plate | Baking paint/spray paint |
| 19 | Lubrication system | It can automatically refuel, so there is no need to worry about damage to the equipment due to lack of oil |
| 20 | Auxiliary materials for guide pillar mould table | Rolling 15 heat treatment and then finishing |
){kind=link}