Biotechnological Equipment for Obtaining Planting Material

• Customization: Available
• After-sales Service: 1 Years
• Warranty: 1 Years
• Model NO.: Xb502843
• Gw: 9987
• Brand: Jinrong
• Term: Fob
• Transport Package: Case
• Specification: customied
• Trademark: Jinrong
• Origin: China
• Package Size: 545.00cm * 543.00cm * 342.00cm
• Package Gross Weight: 38003.000kg

Product Description

Thank you very much for your attention to our equipment. The parameters, configuration and price of the equipment are as follows:
I. Equipment technical requirements and configuration
I. Design basis
According to the raw material properties and processing volume requirements provided by your company, with "low carbon and environmental protection" as the design concept, the petrochemical process simulation software is used to simulate the process of bio-oil treatment, and the optimization design results of the process and tower, heating furnace, and cold exchange equipment are obtained;

In terms of internal parts selection, according to the three major balances of the tower, the characteristics of different fillers and tower plates are compared to select appropriate internal parts, so as to adapt to local conditions; the whole process design is based on simulation calculations, and draws on previous engineering experience, fully considering the stability of equipment operation, the length of maintenance cycle, economic cost and other factors to propose the following specific plans.

1. 1. Basic data
   2. The raw material properties information is as follows:

Table 1-1 Raw material properties

No	Name	Content	Remark
1	Bio-oil	100%

1.2 Input conditions for container and tower equipment design
Basic wind pressure: 400N/m2
Snow load: 500N/m2
Site roughness is "B", and the site soil type will be proposed after the geological survey data is returned.
1.3 Device scale
Daily processing capacity: 10 tons
Operation time: 24 hours
Operation flexibility: upper and lower limits 20%
1.4 Product index requirements
Product design index requirements are as follows:
Table 1-4 Product Properties

No	Name	Content	Notes
1	Dry gas	3%	Dry gas is used as fuel for heating furnace
2	Front fraction (light oil)	Design value 5-7%	50-170ºC (decompression)
3	Sideline oil (biodiesel)	Design value 75-80%	170-290ºC (decompression)
4	Heavy fraction (vegetable asphalt)	Design value 12--15%	380-500ºC
5	Note:The design does not take into account the presence of other components.

1.5 Public Engineering Conditions
The public engineering conditions required for the device are shown in the following table:
Table 1-5 Public Engineering Conditions Table

No	Item	Pressure	Temp.	Others
1	Production water supply (fresh water)	0.4MPaG	Normal
2	Circulating water (supply water)	0.8MPaG	30ºC
	Circulating water (return water)	0.25MPaG	35ºC
3	Saturated steam	0.8 MPaG
5	Power supply (medium pressure)			800kW,50Hz
	Power supply (low pressure)			380V/220V,50Hz
7	Non-purified compressed air	0.65 MPaG	Normal

II. Technical Solution
2.1 Brief Description of Process Flow
This project adopts the unique production process and equipment that absorbs and develops Japan's HAVE technology and the molecular distillation technology for purifying fatty acid methyl esters jointly developed with the company's technical research and development partner Shanghai East China University of Science and Technology, and combines it with its own refining technology. It is an advanced new process for biodiesel production in the same industry at home and abroad.