River Sand Drying Plan with an Capacity of 50-60 Tons Per Hour

• Customization: Available
• After-sales Service: 1 Years
• Warranty: 1 Years
• Model NO.: 50-60 tons per hour
• Nw: 342
• Gw: 367
• Term: Fob
• Brand: Jinrong
• Transport Package: Case
• Specification: customied
• Trademark: Jinrong
• Origin: China
• Package Size: 33.00cm * 22.00cm * 11.00cm
• Package Gross Weight: 221.000kg

Product Description

First of all, thank you very much for your attention to our equipment. The parameters, configuration and price of the equipment are as follows:
River sand drying plan with an capacity of 50-60 tons per hour
I. Overview
The name of your company's material is river sand, the initial moisture content is calculated as 7 %, the final moisture requirement is 1%, the output per hour is about 50 t/h, and the heat source is natural gas.
II. Table of parameters required for drying

No	project	parameter
1	Material name	river sand
2	Initial moisture	7 %
3	Moisture after drying	1%
4	Capacity	50 t/h (take the middle number)
5	Original feed quantity	50t /h
6	Drying evaporated water amount	3.5 t/h
7	Intake air temperature	750ºC
8	Exhaust gas temperature	120ºC
9	Heating energy required	About 2.4 million kcal/ h
14	Fuel consumption	Approximately one ton of gas consumption is 5 cubic meters of gas

III. Process Overview
According to the parameters provided by the manufacturer and the data calculated in the above table, our company's technical department carefully studied and adopted a MGΦ3.2*8m high-efficiency three-circuit drum dryer, and a four-cylinder cyclone collector + pulse bag dust collector for dust removal .
The system process flow is divided into five parts:

1) Heat source system (natural gas)
2) Drying system ( Φ3. 2 *8m high-efficiency three-return drum dryer + air lock valve )
3) Conveying system (feeding belt conveyor + discharging heat-resistant belt conveyor)
4) Electrical control system, including control cabinet, thermocouple, temperature digital display , frequency converter, etc.
5) Tail gas dust removal and emission system.
2. Material process flow of the drying system of this project:
River sand → forklift loading → transition silo → belt conveyor feeding → dryer material head → three-cylinder dryer (downstream) → heat exchange in the drum → discharge valve → discharging heat-resistant belt conveyor →Finished product
3. The hot air process of the drying system of this project:
Hot air after combustion → heat exchange in the drum → cyclone collector → pulse bag dust collector → discharge
4 System process description: Omitted, see process flow chart, for reference only, different customer situations and requirements are different.
Quotation and description of equipment

No.	Name	Model	Qty	Rate ( USD )	Remark
1	River sand tumble dryer	50~60T/H	1 set	216,667	Implement Chinese standards
2	Total FOB Tianjin/Qingdao Port USD 216,667