Back Pressure Turbine Generator Set

• Customization: Available
• After-sales Service: 3 Years
• Warranty: 1 Years
• Model NO.: QT10-15
• Brand: Jinrogn
• Term: Fob
• Nw: 365
• Gw: 387
• Transport Package: Case
• Specification: customied
• Trademark: Jinrong
• Origin: China
• Package Size: 120.00cm * 22.00cm * 22.00cm
• Package Gross Weight: 234.000kg

Product Description

Tubular centrifuge is a high-speed centrifuge with a tubular drum. The whole machine adopts a front-opening structure, and is sterile, fully enclosed and clean, lined with stainless steel (304) inside and outside. It has a beautiful appearance. Its drum has a small diameter, a large length, and a high speed. It is used to handle low-concentration suspensions and liquids that are difficult to separate. Components in an emulsion. The separation factor of the tubular centrifuge is as high as 13000 to 62000, and the separation effect is good. It is suitable for processing difficult solid particles with a diameter of 0.01 to 100 microns, a solid phase concentration of less than 1%, and a density difference between the light phase and the heavy phase greater than 0.01 kg/dm. Separating suspension or emulsion, the processing capacity is 0.1 to 2 cubic meters per hour. Tubular separators are often used for separation of oil, water, bacteria, and proteins, clarification of essential oils, biological products, blood separation, etc. Special ultra-fast tube separators can be used to separate and concentrate liquid mixtures of different densities.

It has strong separation ability, simple structure, convenient operation and maintenance, low energy consumption and small floor space. High speed, high separation factor, suitable for high and low temperature materials, low noise.
GQ-clarified type: used for various suspensions that are difficult to separate. It is especially suitable for solid-liquid separation with small concentration, high viscosity, fine solid particles and small solid-liquid gravity. For example: various medicinal liquids, glucose-chlorhexidine, malic acid, various oral liquids, clarification of mountain beans; coal tar, graphite clarification, extraction of various proteins, saponins, pectin; refining of molasses; blood separation, vaccines Mycelium, various glucose sedimentation, paint, various resins, rubber solution purification.

II. Document

1	Certificate	Random	1
2	Complete machine no-load test run report	Random	1
3	Drum dynamic balance experiment report	Random	1
4	Packing List	Random	1
5	Outline structure diagram	Random	1
6	Foundation drawing	Random	1

IV. Centrifuge design, manufacturing and inspection standards:
Product Standard JB/T 9098-2005 National Standard Inspection of Tubular Separator
1. The machine has a front door opening structure, which is convenient for unloading, disassembly and assembly, and is convenient for maintenance and repair;
2. The drum and parts in contact with materials are made of 304 stainless steel. The drum processing adopts 7 processes (the raw materials require side wall straightening, rough turning, solution turning, semi-finishing turning, high temperature stabilization, fine turning, and dynamic balancing). Arm welds undergo X-ray flaw detection;;
3. High-speed bearings adopt Japanese Seiko NSK brand;