CNC Cutting Saw Yh-J2045 From Nancy Du

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: YH-J2045
• Z Axis Cylinder Specifications: Sc80*250s
• Specification of Pressure Cylinder: Mgpm63*75-S
• Pressure Roller Cylinder Specification: Pressure Roller Cylinder Specification
• Standard Toolbox (Simple Tool): 1 Set
• Transport Package: Case
• Specification: Length 7000X width 3050Xheight 2200mm
• Trademark: jinrong
• Origin: China
• Package Size: 700.00cm * 305.00cm * 220.00cm
• Package Gross Weight: 300.000kg

Product Description

Product Description

 

First, equipment use and introduction: CNC cutting saw is a high efficiency fine cutting saw. This CNC cutting saw can complete the vertical and horizontal bidirectional cutting, can completely replace only one-way cutting electronic cutting saw and high cost of manual push table saw. The efficiency is more than 6 times that of manual push table saw.
Second. Site working conditions and environment:
1. Processing product material: wood.
2. Applicable power supply: three-phase 380V±10%, 50Hz±2%.
3. Relative humidity 61%-81%.
4. Temperature: -5ºC~40ºC.
Third. Technical parameters and configuration:
1. Model number: YH-J
2. Course: X axis...... >4500mm
Y axis...... >2000mm
Z axis...... >150mm
3. Worktable: 4500*2000mm Material: density board
4. The fastest moving speed: X axis, Y axis: ≤36m/min; Z: ≤20m/min
5. The fastest cutting speed: X axis, Y axis: ≤20m/min; Z: ≤15m/min
6. Total installed power: about 20kw
7. System: Taiwan Baoyuan
8. Rail: Taiwan CSK, Germany SLM, Taiwan Shanghai Silver
9. Saw shaft motor moss new 9kw 7.5kw
10. Screw oil feeding mode: automatic (advanced grease) guide rail oil feeding mode: automatic (advanced grease..
11. Working pressure :0.7MPA
12. Voltage requirements: three-phase 380 V, 50-60 Hz. Mechanical accuracy according to GB/39351-96 standard. The frame beam and base are standard.
13. Signal power cord: less than 4 square meters for the drag chain special high flexible wire
14. Machine accuracy: geometric accuracy 0.1mm/200mm; Repeated positioning accuracy: ≤ 0.1mm; Workpiece machining accuracy: ±0.1mm/200mm
15. Both beam mounting frame and table mounting frame adopt thickened square pass
400 times 300 times 10, 300 times 150 times 8
16.16mm20mm thick steel plate welding, and do stress relief treatment
17. Use coarse. Fine. Secondary processing ensures its mechanical accuracy
18. The connection between servo motor and screw is connected by expansion diaphragm coupling, which is safer and more reliable. The Z-axis adopts high-power servo motor with brake to ensure Z after power failure and gas break
The shaft will not fall, so as to avoid damage to the workpiece and table
19. With hand pulse handwheel
20. Maximum size of saw blade: 14 inch 355mm
21. Electrical Appliances:  France
22. Body color: White
Fourth, electrical parts:
The system adopts the latest industrial system LCD display in Taiwan.
The system opens automatic function touch screen can be operated directly.
External PC and portable computer can be connected through software.
Can directly input programs and modify. Network online transmission processing function. (With USB port.)
There is fault self-diagnosis, display function. Chinese panel is easy to operate.
The processing feed speed can be changed at any time as required by on-site production. Work coordinate display call function.
Automatic tool compensation function.
Servo controller adopts Inweiteng Zhishan servo controller. This machine is compatible with Fanuc Siemens systems.
Fifth, performance characteristics :(accessory configuration)
The table adopts the checkerboard design table. Can withstand high load machining. Taiwan TBI high precision ball screw and female pair (P1 class), and Taiwan CSK high precision dust proof guide rail, and can withstand high load ball bearings.
The X-axis guide rail adopts the 30HSS series, and the two guides are equipped with four sliders, which can withstand high load for a long time.
The Y-axis guide rail adopts the 30CSS series, and the two guides are equipped with four sliders, which can withstand long time and high load.
Z-axis guide rail adopts 30HSS series, four guide rails
Multiple overtravel protection
Adopt humanized standard safety display light. Automatic oil supply system
Sixth, standard configuration and accessories
Z-axis cylinder specification :SC80*250S
Cylinder size :MGPM63*75-S
Roller cylinder specification :SC50*125-S
Standard toolbox (simple tools) 1 set
All kinds of operating instructions, 1 set of documents

Company Profile

 

Liaoning Jinrong Machinery Import and Export Co., Ltd. is a large group company with its own import and export rights, integrating industry and trade. The registered capital of the company is 180 million RMB. The     company's subsidiaries include Metallurgical Equipment Manufacturing Company, Electric Furnace Equipment Manufacturing Company, Electrical Equipment Manufacturing Branch, Mechanical Processing Branch, and Metallurgical Design and Research Institute
      Our company can undertake turnkey projects for the design, manufacturing, installation, commissioning, and trial production of various metallurgical equipment. Our company can provide various metallurgical equipment and machinery such as mining machinery, ironmaking blast furnaces, sintering machines, coking coke ovens, converters, electric arc furnaces, ladle refining furnaces, continuous casting equipment, steel rolling heating furnaces, steel rolling production lines, steel structure factories, and cranes. Various types of mechanical equipment can also be provided
      Our company is a direct agent for large steel mills such as Ansteel, Bengang, and Fushang. We have a complete range of steel products, including pipes, plates, profiles, and wires, all of which are available in stock. If there are special specifications, material requirements, etc., we can organize and arrange ordering and selection, schedule production and rolling to ensure supply.
Our company has a history of 30 years and has established friendly contacts with over 120 countries and regions, as well as engaged in various aspects of cooperation. We welcome customers from various countries to visit and inspect our company.

Address: :1-51-901-3041, Floor 9, Jiangsu Building, Qianyuan Emerging Market, Tiexi District, Anshan City, Liaoning Province
 

Total Number of Staffs		585
Total Number of Managers		40
Total Number of Technical Staffs		160
Total Number of QC Staffs		15
Total Number of workers		310
Total Number of other staffs		60
Contact person	Mr .Su	Position	president
Tel	0086-412-8554538	Mobile	0086-13700125807