CNC Cutting Board Saw Yh-J2045

• Warranty: 1 Year
• Type: Yh-J
• Line: X Axis... >4500mm Y Axis...... >2000mm Z-Axis....
• Work Surface: 4500*2000mm
• Material: Density Board
• Fastest Moving Speed: X Axis, Y Axis: ≤36m/Min
• Model NO.: YH-J2045
• Fastest Cutting Speed: X Axis, Y Axis: ≤20m/Min; Z: ≤15m/Min
• Transport Package: Wooden Box
• Specification: YH-J2045
• Trademark: Jinrong
• Origin: China

Product Description

NO	Name Specification Model	quantity	price
1	CNC cutting board saw YH-J2045	1	241,800 yuan
Note: The price does not include packaging freight and other costs, after confirming the equipment accounting. Delivery time is 35 days

Processing size: 2000mm*4500mm plate
equipment size: length 7000mm* width 3050mm* height 2200mm
Nc cutting board saw arrangement sheet

1. equipment use and introduction:

CNC cutting saw is a high efficiency fine cutting saw. This CNC cutting saw can complete the vertical and horizontal two-way cutting, can completely replace only one-way cutting electronic cutting saws and high cost manual push table saws. The efficiency is more than 6 times that of manual table saw.
II.site working conditions and environment:
1. Processed product material: wood.
2. Applicable power supply: three-phase 380V±10% 50Hz±2%.
3. Relative humidity 61-81%.
4. Temperature: -5ºC~40ºC.
III.technical parameters and configuration:
1. Type: YH-J
2. Line: X axis... >4500mm
Y axis...... >2000mm
Z-axis...... >150mm
3. Work surface: 4500*2000mm  Material: density board
4. Fastest moving speed: X axis,Y axis: ≤36m/min; 
5. Fastest cutting speed: X axis, Y axis: ≤20m/min; Z: ≤15m/min
6. Total installed power: about 20kw
7. System: Taiwan Baoyuan
 8. Rail: Taiwan CSK, Germany SLM, Taiwan Shang Yin
 9. Saw shaft motor Taxin 9kw 7.5kw
10. Lead screw feeding mode: automatic (advanced grease)
Guide rail feeding mode: automatic (advanced grease) 
11. Working air pressure :0.7MPA
12. Voltage requirements: three-phase 380 volts, 50-60 Hz. Mechanical accuracy according to GB/39351-96 standard. The beam and base of the rack are standard.
13. Signal power cord: under 4 square meters is the high flexible cable for the tow chain. 14:Machine accuracy: geometric accuracy 0.1mm/200mm; Repeated positioning accuracy: ≤ 0.1mm; Workpiece machining accuracy: ±0.1mm/200mm

1. Beam mounting frame and mesa mounting frame are welded with thickened square pass 400*300*10 300*150*8
2. 16mm20mm thick steel plate, and do stress removal treatment
3. It adopts coarse, fine and secondary processing to ensure its mechanical accuracy

18. The servo motor and the screw are connected by a dilated-sleeve diaphragm coupling, which is safer and more reliable. The Z axis uses a high-power servo motor with brake to ensure that the Z axis will not fall after the power is cut off, so as to avoid causing damage to the workpiece and the mesa.
19.With hand pulse handwheel
20. Saw blade maximum size: 14 inches 355mm
21. Electrical equipment: France Schneider
22. Color: white
IV. electrical parts:
The system adopts the latest industrial system LCD display in Taiwan.
The system opens automatic function touch screen can be operated directly. External PC and portable computer can be connected through software. Can directly input programs and modify. Network online transmission processing function. (With USB port.) There is fault self-diagnosis, display function.
Chinese panel is easy to operate.
The processing feed speed can be changed at any time as required by on-site production. Work coordinate display call function.
Automatic tool compensation function.
Servo controller adopts Inweiteng Zhishan servo controller. This machine is compatible with Fanuc Siemens systems.
V. Performance characteristics :(accessory configuration)
The table adopts the checkerboard design table. Can withstand high load machining. Taiwan TBI high precision ball screw and female pair (P1 class), and Taiwan CSK high precision dust proof guide rail, and can withstand high load ball bearings. The X-axis guide rail adopts the 30HSS series, and the two guides are equipped with four sliders, which can withstand high load for a long time. The Y-axis guide rail adopts the 30CSS series, and the two guides are equipped with four sliders, which can withstand long time and high load. Z-axis guide adopts 30HSS series, four
Four guide rail multiple travel protection with humanized standard safety display light. Automatic oil supply system
VI.Standard configuration and accessories
 Z-axis cylinder specifications :SC80*250S press cylinder specifications :MGPM63*75-S press roller cylinder specifications :SC50*125-S
 standard toolbox (simple tools) 1 set
 various operating instructions, 1 set of documents

NO	Name Specification Model	quantity	price
1	CNC cutting board saw YH-J2045	1	241,800 yuan
Note: The price does not include packaging freight and other costs, after confirming the equipment accounting. Delivery time is 35 days

Processing size: 2000mm*4500mm plate
equipment size: length 7000mm* width 3050mm* height 2200mm
Nc cutting board saw arrangement sheet

1. equipment use and introduction:

CNC cutting saw is a high efficiency fine cutting saw. This CNC cutting saw can complete the vertical and horizontal two-way cutting, can completely replace only one-way cutting electronic cutting saws and high cost manual push table saws. The efficiency is more than 6 times that of manual table saw.
II.site working conditions and environment:
1. Processed product material: wood.
2. Applicable power supply: three-phase 380V±10% 50Hz±2%.
3. Relative humidity 61-81%.
4. Temperature: -5ºC~40ºC.
III.technical parameters and configuration:
1. Type: YH-J
2. Line: X axis... >4500mm
Y axis...... >2000mm
Z-axis...... >150mm
3. Work surface: 4500*2000mm  Material: density board
4. Fastest moving speed: X axis,Y axis: ≤36m/min; 
5. Fastest cutting speed: X axis, Y axis: ≤20m/min; Z: ≤15m/min
6. Total installed power: about 20kw
7. System: Taiwan Baoyuan
 8. Rail: Taiwan CSK, Germany SLM, Taiwan Shang Yin
 9. Saw shaft motor Taxin 9kw 7.5kw
10. Lead screw feeding mode: automatic (advanced grease)
Guide rail feeding mode: automatic (advanced grease) 
11. Working air pressure :0.7MPA
12. Voltage requirements: three-phase 380 volts, 50-60 Hz. Mechanical accuracy according to GB/39351-96 standard. The beam and base of the rack are standard.
13. Signal power cord: under 4 square meters is the high flexible cable for the tow chain. 14:Machine accuracy: geometric accuracy 0.1mm/200mm; Repeated positioning accuracy: ≤ 0.1mm; Workpiece machining accuracy: ±0.1mm/200mm

1. Beam mounting frame and mesa mounting frame are welded with thickened square pass 400*300*10 300*150*8
2. 16mm20mm thick steel plate, and do stress removal treatment
3. It adopts coarse, fine and secondary processing to ensure its mechanical accuracy

18. The servo motor and the screw are connected by a dilated-sleeve diaphragm coupling, which is safer and more reliable. The Z axis uses a high-power servo motor with brake to ensure that the Z axis will not fall after the power is cut off, so as to avoid causing damage to the workpiece and the mesa.
19.With hand pulse handwheel
20. Saw blade maximum size: 14 inches 355mm
21. Electrical equipment: France Schneider
22. Color: white
IV. electrical parts:
The system adopts the latest industrial system LCD display in Taiwan.
The system opens automatic function touch screen can be operated directly. External PC and portable computer can be connected through software. Can directly input programs and modify. Network online transmission processing function. (With USB port.) There is fault self-diagnosis, display function.
Chinese panel is easy to operate.
The processing feed speed can be changed at any time as required by on-site production. Work coordinate display call function.
Automatic tool compensation function.
Servo controller adopts Inweiteng Zhishan servo controller. This machine is compatible with Fanuc Siemens systems.
V. Performance characteristics :(accessory configuration)
The table adopts the checkerboard design table. Can withstand high load machining. Taiwan TBI high precision ball screw and female pair (P1 class), and Taiwan CSK high precision dust proof guide rail, and can withstand high load ball bearings. The X-axis guide rail adopts the 30HSS series, and the two guides are equipped with four sliders, which can withstand high load for a long time. The Y-axis guide rail adopts the 30CSS series, and the two guides are equipped with four sliders, which can withstand long time and high load. Z-axis guide adopts 30HSS series, four
Four guide rail multiple travel protection with humanized standard safety display light. Automatic oil supply system
VI.Standard configuration and accessories
 Z-axis cylinder specifications :SC80*250S press cylinder specifications :MGPM63*75-S press roller cylinder specifications :SC50*125-S
 standard toolbox (simple tools) 1 set
 various operating instructions, 1 set of documents