Product Description
JTFY-24 automatic negative pressure filling machine
Product Description for Material Transfer Speed
This machine is mainly used for bottle filling of easily foaming liquids such as wine, soy sauce, vinegar, and beverages that require consistent liquid levels.
1) Adopting the principle of low vacuum filling, filling the bottle wall without choking or foaming, ensuring consistent liquid level after filling.
2) Bottles with damaged bodies will automatically not be filled, will not spill, will not break, and will automatically adapt to bottle height errors. The carefully designed bottle support device is made of high-quality materials, with reasonable design, high-end processing technology, and precise compression shock absorption ratio to ensure the service life of the bottle support device.
3) The filling valve adopts the most advanced filling principle in the filling industry, with reasonable design, excellent quality, and precise processing of parts to ensure the required liquid level after filling.
4) Without disassembling the filling valve, simply lift the valve upwards and turn it clockwise by 15 degrees to keep the filling valve in a normally open state. At this time, it is convenient to perform reverse flushing on the filling barrel and filling valve. Adopting a single pin fixed valve body structure, the valve core can be pulled out as a whole by gently pulling the pin shaft. The principle is simple and the maintenance is extremely convenient.
5) The filling machine uses imported high-sensitivity liquid level probes, imported liquid level control devices, and pneumatic angle seat valves to ensure that the liquid level in the filling barrel fluctuates within 30mm. This device can achieve synchronous action with the wine inlet pump and can also achieve liquid filling without a high-level tank.
Main performance parameters:
Production efficiency: 3000-4000 bottles/hour 1L
Filling capacity: 150-5000 milliliters (customizable)
Suitable bottle height: 180-680mm (customizable)
Liquid level error: ± 0.3mm
Total power: 2.7KW
Dimensions: 2400x2400x2200mm
Fully automatic cap rolling machine
The linear capping machine is suitable for capping bottles of various materials and shapes such as plastic bottles, glass bottles, PET bottles, etc. It is a new generation capping equipment designed for automatic capping processes in tablet production lines and liquid filling lines. It overcomes the disadvantages of slow capping speed, loose capping, and limited applicability of intermittent capping machines, and is also superior to the limitations of limited applicability and frequent mold replacement of rotary capping machines.
The design of this machine adopts processes such as linear bottle feeding, automatic cap dropping, and uninterrupted cap spinning. Advanced lifting cap dropping systems are used for cap sorting and feeding, which avoids the noise of oscillating cap dropping and greatly improves production, expanding the application range of bottle caps.
Technical parameters:
Production capacity (bottles/minute): 50-200 (depending on container and lid size)
Applicable bottle mouth diameter (mm): Φ 30-120 (can be customized according to customer needs)
Applicable lid diameter (mm): Φ 20-50 (the bottle dropping track needs to be customized according to the bottle cap specifications)
Dimensions (mm): 2000 × 1000 × 1500 (lifting 1080 × 600 × 1860)
Total power of motor (w): 1300
Power supply: 380v/50-60Hz
Fully automatic aluminum foil sealing machine (water-cooled and air-cooled integrated)
Capping machine
Performance comparative advantage:
1. Operating system - using traditional operating interface, simple and stable.
2. Functional advantages - Used in conjunction with a capping machine, automatic capping without a lid and automatic stopping with a lid, achieving automated control.
3. Continuously variable transmission - the speed of the top cover can be adjusted according to production needs.
4. Electrical components - all use internationally renowned brands to ensure the stability of the equipment.
5. Mechanical components - The main parts of the machine are made of 304 stainless steel.
6. Maintenance status - This machine meets GMP requirements and can be easily disassembled, cleaned, and maintained.
Technical parameters:
1. Power supply: 220V/0.35Kw
2. Production speed: ≤ 2500 pieces/hour
3. Dimensions: 900mm × 800mm × 2000mm
4. Applicable cover type: customized to cover
Automatic aluminum foil sealing machine (water-cooled air-cooled)
The material of sealed containers can be polyethylene (PE), polypropylene (PP), polyester (PET), polystyrene (PS), ABS, glass, etc., and cannot be used for metal bottle bodies and caps.
Technical parameters:
Power: 3000W
Power supply voltage: AC 220V/50Hz 13A
Sealing diameter: φ16-50mm φ30-80mm φ70-120mm
Sealing speed: 3-12m/min, 40-150 bottles (120 bottles/min for 30mm PE bottles)
Container height: 30-260mm. Special requirements can be customized. Sensor size: 850 × 120 × 90mm
Equipment volume: 600 * 450 * 1150
Operating frequency: 80kHz
Equipment features:
Equipment type: Fully automatic water-cooled and air-cooled integrated high-speed sealing machine
Control System: Transistor Modular Digital Integrated Circuit Control
Water pressure control: It has an automatic power-off function when the cooling water level drops or when the circulating water is blocked or blocked. Automatic protection: When the whole machine exceeds the temperature, current, or voltage limit, the high-frequency automatic heating stops to achieve the protection function.
Automatic self-adhesive labeling machine
| Labeling ability of square bottles |
50-150 pieces/minute(BPM) |
| Circular bottle labeling capability |
50-300 pieces/minute(BPM) |
| Roll bottle belt speed |
0~60m/min |
| Paste standard accurately |
±1mm |
| Minimum length of label |
30mm |
| Total power |
power supply |
2500W |
220V 50Hz |
Carton sealer
Main technical parameters:
1. The maximum width and height of the applicable cardboard box are 500 × 600 millimeters
2. The upper and lower sealing actions of the cardboard box can be completed in one go, and can be adjusted according to the size of the cardboard box.
3. The sealing is smooth, beautiful, standardized, highly effective, and easy to operate.
4. Can be used as a standalone unit or paired with packaging production lines.
5. Sealing speed: ≥ 15 boxes/minute
Company Profile
Liaoning Jinrong Machinery Import and Export Co., Ltd. is a large group company with its own import and export rights, integrating industry and trade. The registered capital of the company is 180 million RMB. The company's subsidiaries include Metallurgical Equipment Manufacturing Company, Electric Furnace Equipment Manufacturing Company, Electrical Equipment Manufacturing Branch, Mechanical Processing Branch, and Metallurgical Design and Research Institute
Our company can undertake turnkey projects for the design, manufacturing, installation, commissioning, and trial production of various metallurgical equipment. Our company can provide various metallurgical equipment and machinery such as mining machinery, ironmaking blast furnaces, sintering machines, coking coke ovens, converters, electric arc furnaces, ladle refining furnaces, continuous casting equipment, steel rolling heating furnaces, steel rolling production lines, steel structure factories, and cranes. Various types of mechanical equipment can also be provided
Our company is a direct agent for large steel mills such as Ansteel, Bengang, and Fushang. We have a complete range of steel products, including pipes, plates, profiles, and wires, all of which are available in stock. If there are special specifications, material requirements, etc., we can organize and arrange ordering and selection, schedule production and rolling to ensure supply.
Our company has a history of 30 years and has established friendly contacts with over 120 countries and regions, as well as engaged in various aspects of cooperation. We welcome customers from various countries to visit and inspect our company.
Address: :1-51-901-3041, Floor 9, Jiangsu Building, Qianyuan Emerging Market, Tiexi District, Anshan City, Liaoning Province
| Total Number of Staffs |
585 |
| Total Number of Managers |
40 |
| Total Number of Technical Staffs |
160 |
| Total Number of QC Staffs |
15 |
| Total Number of workers |
310 |
| Total Number of other staffs |
60 |
| Contact person |
Mr. Su |
Position |
President |
| Tel |
0086-412-8554538 |
Mobile |
0086-13700125807 |
Audited Supplier 
){kind=link}