2800/250 Triple Fourdrinier Wire with Multicylinder Kraft Liner Paper Machine From Hazel

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: 3 PLY
• Key Words: Seller Paper Machinery
• Important Data: 3 Ply Wire Section
• Content: Pope Reeling Machine
• Transport Package: Wooden Crate
• Specification: 940*994*1280
• Trademark: Jinrong
• Origin: China
• Production Capacity: 5000 Piece/Year
• Package Size: 450.00cm * 750.00cm * 840.00cm
• Package Gross Weight: 420.000kg

Product Description

I. PRESENTATION OF THE PROJECT
² SELLER Paper Machinery to offer a proposal for a brand new machine from head box to rewinder for 2800-250 triple-wires four drinier multi cylinder test liner paper machine. 
² SELLER is responsible for the general layout design and supply of the paper 
machine from headbox to pope reel and rewinder.
SCOPE: 
² 3 PLY wire section (Top ply 6000mm, Under top ply 9000mm, Bottom ply 20000mm) 
² Ø 850 mm/ Ø 900 mm suction press 
² Ø 1250 mm/ Ø 1250 mm jumbo press 
² Ø 1250 mm/ Ø 1250 mm jumbo press 
² Dry section (24 x Ø 1800) 
² 8+8+ size pres (Ø 750 mm/ Ø 750 mm) + 8 
² Sizing machine Φ950/950mm 
² Calender Φ500/500mm 
² Pope reeling machine 
² Rewinder
Technical specifications
v Main technical parameters 
² In accordance with your requirements, we had designed the equipment to obtain the following characteristics: 
v Introduction of paper and pulp 
² Item                Test-liner paper & kraft paper 
² Ration              120-300g/m² 
² General ration        150g/m² 
v Specification data of paper machine 
² Capacity    100T/24hours(according to 150g/m2, 165m/min,22.5 hours) 
² Wire width  3200mm 
² Paper width before reeling machine 2860mm 
² Trimmed width  2800mm 
² Gauge      3800mm 
v Speed 
² Design speed        250mm 
² Balanced speed       350m/min
² Transmission speed   230m/min 
² Dynamic Balanced Vehicle Speed of reeling roller   1200m/min 
² Working speed    130-180m/min 
v Dry degree 
² Concentration of wire   0.5-1.0% 
² Out of wire section    20%~22%(±1%) 
² Out of press section    44-46%(±1%) 
² Before sizing     92% 
² Before reeling    92% 
² Sizing concentration    8% 
² The transverse shrinkage   About 3.5-4% 
² Arrange layout    Stand at the reel machine and look at the wire. Drive section on the right hand side. 
v Arrange layout 
² Paper machine layout   Single floor 
² Align type    Right hand machine 
² Cross moisture difference   ≤±1% 
² Cross quantitative difference   ≤±1.5%6 
v Crane 
² The maximum weight is press roller   Maximum load weight 15 T 
v Roller Dynamic Balance Grade   G2.5 
v Dryer cylinder Dynamic Balance Grade G4 
v Requirements for water,electricity, steam, hydraulic and compressed air 
v Clear water and clarified water 
² Clear water: Pure, colorless and sand removal are required. 
Ph:         Value approaching neutrality. 
Press:       3MPa,2MPa,0.4MPa. 
² Clarified water (recovery of white water). 
Maximum solid content:   100mg/l; 
Ph:                    6-8; 
Press:                  0.4MPa. 
v Power source parameters 
² High voltage:  AC10000V±10% 
² Low voltage:   AC400V/220V±5% 
² Frequency:     50HZ±1%
² Mill power supply:  400 V AC ± 10% - 50 Hz ± 5% - 3 Ph 
² Electrical Power:  3x400 VAC 50 Hz, 1x220 VAC 50 Hz 
² Control Power:  220 VAC, 50 Hz, 1 Phase 
² Input PLC Signal:  24 VDC 
² Output PLC Signal:  24 VDC
v Atmoshere local conditions 
² Annual average temperature: 11.1 °C 
² Highest temperature: 40 °C 
² Lowest temperature: -35 °C 
² Lowerst indoor temperature: -20 °C 
v Air 
² Compressed air (working air):   Max pressure 0.7 MPa 
² Compressed air (instrument air): Design pressure 0.4 MPa, well dried 
² Temperature ambient air electric: 15-40° C 
² Switch cabinet and control cabinet: 15-40° C 
² Air moisture for ambient air electric: 30-90 % 
² Switch cabinet and control cabinet: 30-90 %

v Steam: Maximum steam pressure of dryer is 0.5MPa (working pressure) 
v Compressed air 
² Medium pressure (gas source): 0.6~0.7Mpa 
² Use pressure: ≤0.5Mpa 
² Quality requirement: 1.Instrument air: filtration, no oil, no water 
                     2.Plant air: General compressed air (dry) 
² Steam temperature:  ≤35ºC 
v Other 
² Color of machine:   To be decided

Liaoning Jinrong Machinery Import and Export Co., Ltd. is a company with its own import and export rights, and is a large group company integrating industry and trade. The registered capital of the company is RMB 180 million. The company includes metallurgical equipment manufacturing company, electric furnace equipment manufacturing company, electrical equipment manufacturing branch, mechanical processing branch and metallurgical design and research Institute.
Our company can undertake all kinds of metallurgical equipment design, manufacturing, installation, commissioning, trial production turnkey project. Our company can provide mining machinery and equipment, ironmaking blast furnace, sintering machine, coke oven, converter, electric arc furnace, ladle refining furnace, continuous casting equipment, steel rolling furnace, steel rolling production line, steel structure plant and crane and other metallurgical equipment and metallurgical machinery. Various other types of mechanical equipment are also available.
Our company is the direct agent of Anshan Steel, Bensteel, Fusteel and other large steel mills, the variety of steel is complete: pipe, plate, profile, wire and so on are in stock. If the special specifications, materials and other requirements, we can organize the order to purchase, schedule production and rolling, to ensure supply.
      Our company has a history of 30 years, and now has established friendly contacts with more than 120 countries and regions and carried out various aspects of cooperation. We welcome customers from all over the world to visit our company.
Location :1-51-901-3041, Floor 9, Jiangsu Building, Qianyuan Emerging Market, Tiexi District, Anshan City, Liaoning Province

Total Number of Staffs		585
Total Number of Managers		40
Total Number of Technical Staffs		160
Total Number of QC Staffs		15
Total Number of workers		310
Total Number of other staffs		60
Contact person	Mr .Su	Position	president
Fax		E-mail	Asyy9825@