300m3/ D (one set) of Reverse Osmosis Seawater Desalination Unit From Hazel

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: GB3100
• Size: 1102
• Package: Wooden Crate
• Brand: Liaoning Jinrong
• Fob: 111
• Transport Package: Wooden Crate
• Specification: 1280*891*463
• Trademark: jinrong
• Origin: China
• Package Size: 720.00cm * 630.00cm * 750.00cm
• Package Gross Weight: 452.000kg

Product Description

1, About biomass pellet machine
HMK series biomass granulators absorb the essence of domestic and foreign granulators. The heart part is a unique "two-layer mold" assembly structure. The "pressing wheel" is refined with high alloy wear-resistant materials. The service life of vulnerable parts is several times that of similar products. The transmission structure is automatically filtered and lubricated. With unique design, reasonable structure, and strong and wear-resistant characteristics, it fills the gap of vertical feeding in domestic ring die granulation and reaches the international advanced level.
This product is suitable for pressing materials that are difficult to bond and form, such as rice husks, sunflower seed shells, peanut shells, and other fruit shells, various wood scraps such as branches, tree trunks, bark, various crop straw, rubber, cement, ash and other chemical raw materials. Applied to biomass combustion plants, power plants, wood processing plants, fertilizer plants, chemical plants, etc., it is the most ideal compression and densification equipment with small investment, fast results, and no risk.
2, Working principle of biomass pellet machine
The biomass pellet machine equipment operates in a direct motor connection mode. The motor is connected to the reducer shaft through a gear coupling and undergoes a 90 ° direction change. The horizontal motor drives the vertical casting hollow transfer spindle, which in turn drives the pressure roller to compact the inner surface of the mold to complete the pressing process. During operation, biomass sawdust raw materials fall vertically from the feeding port and are continuously and uniformly distributed on the surface of the mold cavity (the contact surface between the pressure roller and the mold) through the rotation of the pressure wheel. Under the rolling of the pressure roller, the powdered material passes through the holes of the mold (uniformly distributed on the holes on the inner surface of the mold). This process involves the material being subjected to high pressure and temperature, resulting in physical or appropriate chemical changes that cause the powdered material to form a continuously elongated cylindrical solid body. The particles are then cut by a cutting knife and discharged from the discharge port, completing the particle compression process.
3. Basis and basic conditions for program preparation
3.1. Citation specifications and references:
Code for Classification of Steel Marine Ship (2006) and Notification of modification (2007 & 2008) Code for Classification and Construction of Marine Mobile Platform (2005) issued by China Classification Society
Code for Materials and Welding (2006) and Amendment Bulletin (2007 & 2008)
Institute of Electrical and Electronics Engineers (IEEE) Standard 45- " Recommendation for Marine electrical installation applications way of doing or making a thing"
China shipbuilding quality standard CSQS1998
Reverse osmosis Desalination Unit GB / T3753-1995
Fresh water quality meets GB5749-2006 raw water quality refer to GB3097-1997 seawater water quality standard
GB3100~3102-1993 legal unit of measurement
The flange connection complies with the GB2506-2005 standard
Product label meets GB / T13306-1991 standard
The product package meets GB / T13384-1992 and the inspection requirements of China Classification Society (CCS)
Other references API (American Petroleum Institute), ASME (American Institute of Mechanical Engineers), AIEEE (Institute of Electrical and Electronic Engineers), IEC (International Electrical Commission), ISO (International Organization for Standardization)
3.2. Basic conditions of the design:
3.2.1. Raw water source: sea water
3.2.2. Design temperature: 25ºC
3.2.3 Terminal water use: drinking water
3.2.4. Fresh water standard: GB5749-2006
3.2.5 Power supply: 380VAC / 50Hz / 3Ph; 220 VAC / 50Hz / 1Ph
3.2.6. Use environment: Use for islands
3.2.7 Treatment process: level 1 reverse osmosis
4. Environmental conditions
The device can operate normally for a long time under the following environment

1. . Ambient temperature: 0~50ºC 

Seawater temperature: 0~45ºC
Relative air humidity: 60%~90%.
(2), swing: ± 22.5 (cycle 3~14s)
    Tilting: in either direction of 15
(3) There are salt spray, oil spray, mold and the vibration and impact caused by normal operation.
(4) Biology: can prevent the harmful effects of all kinds of molds, fungi, termites and rodents.
(5), the weather: all-weather.
(6) Applicable sea areas: applicable to all sea areas of China and the world.
5. Supply requirements
5.2. Scope of supply
(1) Provide water supply and pretreatment system (including water supply pump, pre-filter, flocculant adding device, scale inhibitor adding device, precision filter and security filter)
(2) Provide an automatic backwashing device with a pre-loading filter
(3) Provide the first-level reverse osmosis desalination system and its operation guarantee system
(4) Provide a cleaning device for reverse osmosis
(5) Provide the UV sterilization device
(6) Provide the online testing instrument required by the system
(7). Provide supporting pipe valve parts (all inlet and export flange and matching flange (including sealing washer, bolts, nuts and gasket), flange is GB2506-2005 standard)
(8) Provide electronic control system (necessary electrical accessories such as cable packing letter, etc.)
(9), Various marks in the whole device
(10) Installation, on-site debugging and trial operation of the whole device
(11) Theoretical knowledge training and operation guidance
(12) Provide random spare parts and special tools
(13). Inspection and test report (including third-party CCS forensics)
(14). Provide the completion drawings and data (including the test outline)
(15) After-sales service and warranty

Total Number of Staffs		585
Total Number of Managers		40
Total Number of Technical Staffs		160
Total Number of QC Staffs		15
Total Number of workers		310
Total Number of other staffs		60
Contact person	Mr .Su	Position	president
Fax

Liaoning Jinrong Machinery Import and Export Co., Ltd. is a company with its own import and export rights, and is a large group company integrating industry and trade. The registered capital of the company is RMB 180 million. The company includes metallurgical equipment manufacturing company, electric furnace equipment manufacturing company, electrical equipment manufacturing branch, mechanical processing branch and metallurgical design and research Institute.
Our company can undertake all kinds of metallurgical equipment design, manufacturing, installation, commissioning, trial production turnkey project. Our company can provide mining machinery and equipment, ironmaking blast furnace, sintering machine, coke oven, converter, electric arc furnace, ladle refining furnace, continuous casting equipment, steel rolling furnace, steel rolling production line, steel structure plant and crane and other metallurgical equipment and metallurgical machinery. Various other types of mechanical equipment are also available.
Our company is the direct agent of Anshan Steel, Bensteel, Fusteel and other large steel mills, the variety of steel is complete: pipe, plate, profile, wire and so on are in stock. If the special specifications, materials and other requirements, we can organize the order to purchase, schedule production and rolling, to ensure supply.
      Our company has a history of 30 years, and now has established friendly contacts with more than 120 countries and regions and carried out various aspects of cooperation. We welcome customers from all over the world to visit our company.
Location :1-51-901-3041, Floor 9, Jiangsu Building, Qianyuan Emerging Market, Tiexi District, Anshan City, Liaoning Province

Total Number of Staffs		585
Total Number of Managers		40
Total Number of Technical Staffs		160
Total Number of QC Staffs		15
Total Number of workers		310
Total Number of other staffs		60
Contact person	Mr .Su	Position	president
Fax		E-mail	Asyy9825@